How Many Squares Is My Roof? - Learn How To Calculate It With Sipe Roofing And General Contracting In
It's time to consider your roofing requirements as the temperature rises and becomes more frequent. Read this article by Sipe Roofing and General Contracting in Burlington, NC to learn how to determine the square footage of your roof. You'll then be able to make an informed decision about the type of roofing which is the best fit for your needs.
https://siperoofingandgeneralcontracting.com/
What is a Sipe roof?
Sipe Roof Sipe Roof is a roofing system that makes use of a series of narrow slits or "sipes" to permit snow, water and ice to drain away as well as preventing snow and rain from getting inside. The idea was conceived by the British engineer James Snow in the late 1800s, and then became popular in the United States during the 1930s.
What is an Sipe Roof?
When it is time to install a roof, many homeowners are understandably worried about the potential for damage caused by rain. There's a good thing, as there are various roofing options available that can help shield your home from weather. One of them is the sipe roof.
What Is a Sipe Roof?
A sipe roof allows air and water to flow through the roof material. This allows the roof to "breath" and avoid water accumulation, which could result in massive damage in climates with high humidity.
What is a Sipe Roof?
A sipe roof functions by allowing water and air to flow through the roofing materials. This stops the accumulation of moisture and shields your home from excessive damage in wet climates.
Sipe Roof Benefits
Sipe roofing is now an increasingly popular choice for homeowners and businesses alike because of the many benefits it can provide. These are just some of the numerous advantages of Sipe roofing:
Sipe roofs are generally stronger than other types of roofs due to their slimmer profiles. This means that they can handle greater loads and weather conditions, without becoming damaged.
* They're also less expensive to maintain than different kinds of roofs, since they don't require as much repair work.
* Lastly sipe roofs typically are more traditional than other roof options, that can appeal to some homeowners.
Cost of Sipe Roof
Here at Sipe Roofing, we understand that calculating the price of a sipe roof could be difficult. We've put together this guide to help you figure out how many squares your roof covers and provide you an estimate of the cost.
First, note the angle of your roof. this is the angle at which the roof's peak is. Divide this number by 144 (the square root of 256) and you will get the length for each side. To calculate the square footage of your roof multiply the length by 12 (to get in inches).
A sipe roof is likely to consist of 12 squares for every inch (50 millimeters) typically. A typical sipe roof of 30 degree pitch would have 300 square feet (27m2). With an average price tag for metal roofs in the U.S. ranging from $8-$12 per square foot,300 sq. feet. will cost approximately $3,600!
How can you determine the amount of square footage on your roof?
If you have a simple roof with a single pitch, the square footage is the length of the roof multiplied by the length of the roof. For a two-pitch roof, each pitch is regarded as a separate square. You'll need to split the area of a roof that has more than one pitch by the total square footage.
To calculate the total square footage for a three-pitch roof, first determine how many squares there are within each pitch. There are three pitches on the three-pitch roof: front, middle and back. Each pitch covers 100 square feet. There are therefore 300 squares of total (300x100 = 3000).
Then, figure out how much space is available between each roof pitch. This is known as "intermediate space." The distance between front and back pitches is 80 inches, between the middle and back pitches is 160 inches, and between the sides and ends pitches is 40 inches. Therefore, there are 240 intermediate spaces (160 + 80 + 40 = 120 + 40 = 240).
Add up all the squares within each space, and then divide it by three. (240 3 = 80). This will give you the square footage of a 3-pitch roof, which includes the space in between pitches. This is 8000 sq feet for each pitch or 8 sq feet per square foot.
Conclusion
Sipe Roofing is able to help you determine the area of your roof. We employ the most precise measurement equipment and tools that we have available to obtain an accurate reading of the roof's dimensions, in order to give you an accurate estimate for new or repairs. Contact us today to schedule an appointment for a no-cost consultation!
Address: 2459 Corporation Pkwy Suite C, Burlington, NC 27215, United States
Phone: +13362647532