FlowCast Tote Set
FlowCast Tote Set will be the next generation of clear casting resin. It is thinnerand clearer and has a higher bio-renewable content than traditional clear resins. It's translucent and appears similar to liquid glass. When it is hardened it turns crystal clear. It is also a recyclable material and can be colored with epoxy.
EcoPoxy FlowCast(r) Casting Epoxy
FlowCast(r) is a two-component epoxy that cures to a clear finish. It can be used with various substrates. The epoxy has enhanced UV stability as well as low exothermic heating buildup. It also works with EcoPoxy's Metallic Color Pigments as well as Liquid Color Pigments. Its low viscosity makes it simple and fast to use. After it has cured it is able to be finished using EcoPoxy's standard finishing techniques.
It is important to follow the manufacturer's instructions while working with epoxy. Mix the resin with hardener according the instructions of the manufacturer. The ratio is usually 2:1 or 4:1. It is advised to mix the two components before pouring.
It takes 72 hours to cure
The FlowCast Tote Set is made of durable, flexible and environmentally friendly EcoPoxy resin. It cures in less than 72 hours and is resistant to stress cracking. It can be coloured with EcoPoxy pigments. FlowCast is ideal for casting and encapsulation, and its see-through properties make objects appear larger inside. For safety, Axminster recommends wearing a FFP2 respirator and eye protection when using the product.
The two-component epoxy formula of FlowCast has excellent water-clear properties. It's compatible with all substrates and has improved UV stability. It's low in exothermic heat buildup. FlowCast can also be used together with EcoPoxy Metallic Color Pigments or Liquid Color Pigments. The formula is 2:1 resin to hardener. Any deviation from this ratio could lead to lower mechanical properties as well as an incomplete cure.
It's simple to use
FlowCast is a two-component epoxy that is easy to work with. It has outstanding air release properties as well as low exothermic heat accumulation. It is a solid that creates crystal clear and resists stress cracking. It is ideal for deep pour applications. It is non-toxic and leaves virtually no odour when mixed.
FlowCast is compatible with woodworking equipment as well as an a belt sander. It is inert to heat, has low viscosity, and is the highest bio-based carbon. It's perfect for casting and seeing through the encapsulation process. This makes it perfect for displaying the contents inside. When sanding FlowCast you will need to wear an air respirator.
Address-: 343 Hercules Rd, Emigrant, MT 59027, United States
Phone:- +14062238330
.
https://all-american-woodworks.business.site/